Precor Icarian Adjustable Cable Crossover

Click Image for Gallery

Precor Icarian Adjustable Cable Crossover

The Icarian 407B Adjustable Cable Crossover is a stand-alone cable crossover machine with two adjustable high/low pulley stations and a connector that offers dual chin-up bar options. The Crossover adjusts quickly to give users a wide range of exercise options.

Equipment Features

Upholstery	Premium-quality upholstery with Beautyguard protective topcoat finish. Fabric meets or exceeds California fire regulations (Bulletin 117, section E). Double-layer slipcover in appropriate high wear areas. Double stitching on all seams.
Bolts	Grade 5 black zinc in most applications.
Cable Routing	Wherever possible, redirection pulleys are used to route cables close to frame to minimize chance of external interference.
Handles	Slip-resistant rubber sleeve with machined alloy end-cap.
Weight Stack	On most selectorized units, the weight stack is elevated 5 inches to facilitate user pin selection from seated position.
Selector Plates	Each selector plate entirely precision machined on all surfaces. Top plate has replaceable Igus precision self-lubricating bushings. Black painted protective finish.
Pivot Points and Joints	Pillow block or flange-mount motor-grade rotary bearings or sleeve bearings utilizing either oil-impregnated bronze bushings or pre-lubricated Igus nylon bushings.
Pulleys and Cables	Glass-fiber-reinforced nylon pulleys with precision motor-grade ball bearings. 3/16-inch (7x19) aircraft cable coated with black pressure-extruded nylon to 1/4 inch or 1/8 inch coated to 3/16 inch. The cable will conform to specification MIL-W-83420D-BARE cable only. Attachments are climbing-rated carabiner design.
Frame and Finish	11 gauge (.120") and 7 gauge (.188") 2x4-inch bent electroweld steel tubing. Minimum of 3 standard bolt tabs on appropriate units. Abrasive grit pre-finish is followed by electrostatically applied, heat-cured powder coat.
Guide Rods	Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and retardation of rust.
Bearings and Pivot Points	Oversized linear reticulating ball bearings are self-aligning, sealed and running on casehardened shafts.

Equipment Specifications

Weight Stack Standard	150 lbs / 68 kg
Options	Rubber Feet Standard Shroud
Weight Stack Heavy	200 lbs / 91 kg
Weight Stack	Depicted weight stack shrouds are not available
Standard Upholstery Colors	Any From Chart
Standard Frame Colors	Any From Chart

Equipment Dimensions and Weight

Length	176 inches / 447 cm
Width	43 inches / 109 cm
Equipment Weight	870 lbs / 396 kg
Height	91 inches / 231 cm

Choose from a large array of materials and colors to match your club design.

Double stitch sewing also available in any thread line.

Upholstery logo embroidery with your design.

Steel Color Frame Options

Powder coating became established as a highly automated industrial process for enhancing the surface quality of preferred metal substrates and all our fitness equipment frames and metal parts run through this process to ensure the highest quality finish and durability.